Reflective Photoelectric Switch Sensor
  • Air ProReflective Photoelectric Switch Sensor
  • Air ProReflective Photoelectric Switch Sensor
  • Air ProReflective Photoelectric Switch Sensor
  • Air ProReflective Photoelectric Switch Sensor
  • Air ProReflective Photoelectric Switch Sensor

Reflective Photoelectric Switch Sensor

As a manufacturer specializing in the production of Reflective Photoelectric Switch Sensor ,Reflective Photoelectric Switch Sensor is also a sensor integrating the transmitter and receiver. The light emitted by the photoelectric switch transmitter is reflected back to the receiver through the mirror. When the detected object passes and completely blocks the light, the photoelectric switch generates the detection switch signal .We are expecting become your long term partner in china......

Send Inquiry

Product Description

Reflective Photoelectric Switch Sensor

 

1.Product Introduction


The Reflective Photoelectric Switch Sensor also integrates the transmitter and receiver. The light emitted by the Reflective Photoelectric Switch Sensor transmitter passes through the reflector and is reflected back to the receiver. When the detected object passes through and completely blocks the light, the Reflective Photoelectric Switch Sensor generates the detection switch signal. There is a red LED indication on the front of the product. It is in the off state when there is no blocked object. It lights up immediately when there is a blocked object. It is very intuitive. The lead length is 100mm. The brown wire is positive 24V, the blue wire is the ground wire, the white wire is the common end of the relay contact, the gray wire is the normally closed and the black wire is the normally open of the relay contact.


2.Product Parameter

 

Product diameter

M18

Sensing distance

2M

baffle-board size

60*40   62*51

Detection object

All objects that can reflect light can be detected

Response frequency

DC:0.5kHz  AC:25Hz

Supply voltage

DC:6-36V

AC:220V or 380V

Withstand voltage

AC1000V 50/60Hz 1min Charge between parts and the shell

Consumption current

N.P:13mA,D:0.8mA,A:1.7mA

Control output current

N.P:300mA,D:200mA,A:400mA

ambient humidity

35-95%RH

ambient temperature

-30℃—+65℃

Temperature effect

-30℃—+65℃Each additional 23℃± 15% detection distance

-25℃—+60℃Each additional23℃+ - 10% detection distance

Loop protection

N.P.D:Reverse connect protection, surge absorption, load short circuit protection  A:Surge absorption

Insulation impedance

More than 500MΩ charge between parts and the shell

Product material

Shell: brass nickel plated ABS  Surface: PMMA

Degree of protection

IP65

 

3.Product Feature And Application


Reflective Photoelectric Switch Sensor  is a new generation of photoelectric switch device manufactured by integrated circuit technology and SMT surface installation process. It has intelligent functions such as delay, broadening, external synchronization, anti-interference, high reliability, stable working area and self diagnosis. This novel photoelectric switch is an active photoelectric detection system electronic switch with pulse modulation. The cold light sources used by it include infrared light, red light, green light and blue light. It can quickly and control the state and action of various substances such as solid, liquid, transparent body, blackbody, soft software and smoke without contact and damage. The utility model has the advantages of small volume, multiple functions, long service life, high precision, fast response speed, long detection distance and strong resistance to optical, electrical and magnetic interference.


4.Product Details


When the Reflective Photoelectric Switch Sensor  senses All objects that can reflect light can be detected, the red inductive light at the tail lights up. It can be wired to make the counter count or sense whether there is residual material.


 

5.Product Qualification


Our Reflective Photoelectric Switch Sensor  has CE certification and guaranteed quality.


 

6.Deliver,Shipping And Serving


We have a large inventory of Reflective Photoelectric Switch Sensor . We can send stock products within 3-7 working days. If there is no stock or insufficient stock, we will check the delivery time with you. We guarantee delivery within the specified time and choose high-quality logistics services. We will use good packaging and ensure safety. We will be responsible for any product damage caused during delivery.

 

7.FAQ

 

Do you have detailed and professional installation manual?

Sure, we have complete product instructions and wiring diagrams.If you need, we can provide you here.

Are you a trading company or a manufacturer?

We are manufacturers and we have our own factories.

Do you provide sample? Free or charge?

We can provide samples here.Regular samples are free, and customized samples need to be charged.

How to ship my order ? Is it safe?

For small package, we will send it by Express, such as DHL,FedEx,UPS,TNT,EMS.That’s a Door to Door service.For big packages, we will send them by Air or By sea.We will use good packing and ensure the safety.We will be responsible to any product damage caused on delivery.

 



Hot Tags: Reflective Photoelectric Switch Sensor, Manufacturers, Factory, Customized, Low Price, China, Suppliers, CE, Latest Selling, Bulk, In Stock

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.